Our Boats

Browse our selection of boats listed below or search by specific category:

 

Materials Pack

Scale:
Hull:
Beam:
Draft:

Materials Pack consists of a selection of styrene sheets and strips. 2 sheets white 2mm 2 sheets white 1.5mm 4 sheets white 1.0mm 1 sheet white 0.75mm 1 sheet white 0.50mm 3mm x 6mm strip are available in bunches of 10 for £1.50

Price: £25.00 plus p&p

Accessories


American Flybridge cabin cruiser.

Scale:
Hull: 34.5 inch
Beam: 11.5 inch
Draft:

AMERICAN FLYBRIDGE CABIN CRUISER.

A wide, stable hull of a type used for sports fishing in the 1950s, makes into a suprisingly nice model. Comes complete with moulded cabin and flybridge, with trim lines and windows moulded in.

Measurements

  • Length....34.1/2".
  • Beam...11.1/2".

Price: £82.00 plus p&p

Accessories

Currently no accessories

Blackboys/Falcon Brook Tug

Scale:
Hull:
Beam:
Draft:

This is a GRP hull for the Blackboys/Falcon Brook Tug.

Price:

Accessories


Boat Shed Sign

Scale:
Hull:
Beam:
Draft:

Shed or workshop sign, CNC cut with a coloured infill. These signs have been crafted from solid Teak wood and lightly oiled. They measure approx 240mm x 70mm with a depth of 8mm. All our signs can be adapted to suit the customer, eg. size, colour infill and choice of lettering.

Price: £10.00 plus p&p

Accessories


Celia Jane

Scale: 24th scale
Hull: 50 inch
Beam: 11.5 inch
Draft:

CELIA JANE

Thames Sailing Barge.

Model Scale = ½" to 1ft. (1:24)

Length….. 50" (+Bowsprit) Beam…11 ½"

The Thames Sailing Barge CELIA JANE was first published as a large plans feature in the Model Boats magazine, she has now been developed into a comprehensive hull & plans set.

The CELIA JANE was a large Coastal type barge originating from around the turn of the century, although not fitted with a bowsprit she most certainly was at one stage fitted with one, as a model she makes a really wonderful sight on the water, the prototype sailed well and was fun to use, with our package listed below she is not too difficult or time consuming to make and indeed could be tackled by the more ambitious beginner.

Our beautifully moulded one piece GRP hull is moulded to the top of the bulwark level and has the side rubbing strips, bow & stern posts all moulded in, very little work is required to get the hull ready for work. 

 

There is a very comprehensive set of drawings to go with this pack, these make for easy and straightforward construction of the model. 

This is a re-mastered drawing showing full-size side elevation, section along centreline of hull and, full-size drawings for Anchor windlass, Main mast box, Brail winch, Leeboards, Stayfall tackle, Rudder mechanism. Section through Wheelhouse and front view. Full-size drawing for Sprit and Topmast. (With all metalwork shown).

This re-mastered drawing shows fully detailed Full-size deck plan layout, model legend and notes..

This re-mastered drawing shows the side as rigged view (drawn half size) and view from forward on main mast. (drawn half size) Full-size drawings for Mainmast, Headstick, Mizzenmast, Mizzen boom, Mizzen gaff. (All masts/booms have all metalwork shown) Crosstree detail drawings, Ships boat and all blocks (drawn full-size.)..

This is a new Template drawing, it shows all deck beams (drawn full-size) full-size deck pieces, all hatch, wheelhouse, scuttle, hatch covers etc. As all are drawn full-size they can be transferred directly to the ply sheets for cutting out and glueing together, this drawing also shows the position of all deck beams..

This is a new Template drawing, it shows full-size all the sails, with all their details and stitching, it is fully annotated for use and should make the actual making of the sails fairly straightforward. 

The above package allows for a really detailed model to be made at 1:24 scale many commercial fittings are available, fitted with two channel RC her performance on the water is really excellent, she makes up into a beautiful model ideal for scale sailing regattas and model barge racing. 

DRG. No.5 

DRG.No.4 

DRG.No.3 

DRG No.2 

DRG. No.1. 

Sail Cloth

HULL.

Price: £158.00 plus p&p (no materials pack)

Accessories

Teak Boat Signs £4.50 a pair

Cheroke Chief MK2

Scale:
Hull: 32INCH
Beam:
Draft:

Omra Z-Class Winner 2007

Standard and modifed class

The Cherokee Chief MK2

The new Cherokee chief mark 2 has a vertical transom and a longer keel length, less dead rise angle and modified spray rails.

Price: £70.00 plus P&P

Accessories


Clan Ross

Scale: 96th scale
Hull: 61.75 inch
Beam: 8.5 inch
Draft:

MOTOR VESSEL CLAN ROSS.

Clan Line Passenger/Cargo Liner.

Our model of the CLAN ROSS is of a Clan Line passenger/cargo liner built be Greenock Shipbuilding Co, (later Scott Lithgow) at Port Glasgow in 1954. One of a large series of ships, CLAN ROSS traded under Clan Lines colours until 1965 when she was transferred to the Clan & Union Castle Line. She was eventually disposed of to Chinese interests in 1972. Very typical of many ships of her day CLAN ROSS was an attractive and well balanced vessel of the traditional three island design, with graceful lines, lots of cargo handling gear and large distinctively capped funnel. Two later ships Clan MacIndoe and Clan MacIlwrath had the whole superstructure moved right aft giving a totally different outline.

Our beautifully moulded large hull features portholes, hull trimline and waterline detail moulded in to assist builders. Supplied complete with very detailed plans drawn for us by MARBETH DESIGNS, this superb hull is ideal for R/C and can be powered with electric motor or a steam plant, with a hull of such high volume there is room for many extra features can be fitted such as electric lights, engine sound, horn, anchors etc.

CLAN ROSS is an excellent subject for the merchant ship lover, the basic hull is of course perfect for conversion to other Clan Line ships, or even liners and merchant vessels of other lines.

Price: £96.00 plus p&p

Accessories


classic hydro

Scale:
Hull: 30.5 incg
Beam:
Draft:

classic hydro

Price: £80.00 plus p&p

Accessories


Cygnus Boat Windows Set

Scale: 1:12 & 1:16 scale
Hull:
Beam:
Draft:

CNC cut styrene Windows Set. Available in 1:12 and 1:16 scale. silver window frames and clear windows.

Price: £20.00 (1:16 scale) £25.00 (1:12 scale)

Accessories


Cygnus Cyclone 26

Scale: 10th
Hull: 32 inch
Beam: 15 inch
Draft: Fast planning hull

This kit comprises of six quality GRP mouldings hull, deck, wheelhouse two deck hatchs and ring deck. All avaliable in pre coloured GRP.

Price: £150.00 PLUS P&P

Accessories

Window Set £20.00
Prop Shaft POA
Propellor POA
Rudder £10.00

Cygnus Cyclone 26 jet drive

Scale: 1 to 10
Hull: 32inch 812mm
Beam:
Draft:

CYGNUS CYCLONE 26 JET DRIVE

set of 6

Price: £150.00 plus p&p

Accessories


Cygnus DS25

Scale: 14th
Hull: 20 inch
Beam: 6.5 inch
Draft: 2.5 inch

Hull only at present.

One at 1:14 scale & one at 1:12 scale

Price: £25.00 (1:14) £55.00 (1:12)

Accessories


Cygnus Gantry Kit 1:12 scale

Scale:
Hull:
Beam:
Draft:

Very strong Gantry kit made from CNC cut 4mm Styrene.

Price: £25.00 PLUS P&P

Accessories

12th scale Cygnus Gantry Kit £25.00

Cygnus GM 33 1:12

Scale: 12th
Hull: 33 inch
Beam: 14 inch
Draft: 6 inch

This kit comprises of five quality GRP moulding hull ,deck, wheelhouse, wheelhouse roof and deck hatch.All of the GRP work is pre-coloured.

Price: £150.00 plus p&p

Accessories

Pre-cut Teak capping £35
Shaft £10
Rudder £10
Net Drum kit £15.00
Windows £20.00
prop £19.00

Cygnus GM32 1:12

Scale: 1:12 scale
Hull: 32"
Beam:
Draft:

CYGNUS GM 32 12th

Price: £150.00 plus p&p

Accessories


Cygnus GM33 1:16

Scale: 16th
Hull: 24.5 inch
Beam: 10.25 inch
Draft: 4.5 inch

This is a Cygnus GM 33 aft wheelhouse 16th scale fishing boat. The kit comprises of five quaility pre coloured GRP moulding hull, deck, wheelhouse, wheelhouse roof and capping.

Price: KIT Price £120 plus p&p

Accessories

rudder £10
Shaft £10
Windows £20
Net drum kit £15
Trawl winch kit £15
A Frame gantry kit £20

Cygnus GM38 1:16

Scale: 16th scale
Hull: 28.1/2 inch
Beam: 10.1/2 inch
Draft:

CYGNUS 38

Length = 28.1/2". Beam = 10.1/2"

Single screw scale model of the 38ft. Cygnus Marine coastal fishing vessel, (illustration as above) designed by Percy Mitchell. Hull shape is of a typical displacement west country fisher. Most harbours in the UK will have some of these brightly coloured fishing vessels in them. On full-size boats hulls are normally blue, decks grey, superstructures white and masts/gantries yellow. Mouldings set comprises: Hull, deck, deck hatch, wheelhouse,  wheelhouse roof. . Copy off original kit drawing.  . A small model that is quite capable of taking rough water and is eminently suitable for model regatta work.

All the above makes for a complete scale kit to make the model to museum standards, when fitted with individual motor controls the on the water performance is very realistic and looks good.

Price: £140.00 PLUS P&P

Accessories

Trawl Winch £15.00
Net drum £15.00

Cygnus GM40

Scale: 14th
Hull: 33 inch
Beam:
Draft:

This kit comprises of four quaility GRP mouldings hull, deck, wheelhouse and wheelhouse roof. All of the GRP work is done in pre-colour

Price: £150.00 PLUS P&P

Accessories

Pre-cut teak capping £35.00
Windows £40
Prop £10
Shaft £10
Rudder £10

Cygnus Revenge 38 fast fishing boat

Scale: 1:12
Hull: 38inch
Beam:
Draft:

CYGNUS REVENGE FISHING BOAT

Price: £150.00 PLUS P&P

Accessories


Cygnus SF33 1:12

Scale: 12th
Hull: 33 inch
Beam: 14 inch
Draft: 6 inch

This kit comprises of five quality GRP mouldings hull, deck, wheelhouse, wheelhouse roof and a deck hatch. All GRP work is done in pre coloured

Rudder, Propellor and propshaft are available on request.

Price: £150.00 PLUS P&P

Accessories

Net Drum Kit £15.00
Trawl winch £15.00
Gantry kit £25.00
Teck capping £35.00
Windows £20.00

Cygnus SF33 1:16

Scale: 1/16th
Hull: 24.5 inch
Beam: 10.5 inch
Draft: 4.5 inch

This kit comprises of 6 quality GRP mouldings hull, deck, deck hatch, wheelhouse, wheelhouse roof and capping. All in pre-coloured GRP

Propellors, propshafts and rudders are available on request.

Price: £120 PLUS P&P

Accessories


Druisilla

Scale: 1 TO 32
Hull: 47.25
Beam:
Draft:

DRUISILLA

Price: £105.00 plus p&p

Accessories


E Phyllis II

Scale: 24th scale
Hull: 43 inch
Beam: 10 inch
Draft:

 American Harbour Tug.

A large model of a typical American harbour tug, the hull includes a moulded in rubbing strake. with full-size detailled plan showing all details and construction hints, the hull is ideal for R/C. electric power, she will however take a steam plant and boiler, access with a removable superstructure is excellent. A full yet simple deck layout and superstructure make this model very easy to build, she is therefore more than ideal for the first time scale builder.

 

Price: £92.00 plus p&p

Accessories


English Tug

Scale:
Hull: 40 inch
Beam: 10 inch
Draft:

ENGLISH STYLE TUG HULL.

Our E.Phyllis II hull with rubbing strakes removed to give a flat side to top of hull, plenty of room to cut washports etc, a good, large, heavy weather hull suitable for a variety of uses.

Measurements

  • Length....40".
  • Beam....10".

Price: £75.00 plus p&p

Accessories


Fairy Huntsman

Scale:
Hull: 47 inches
Beam: 14.5 inches
Draft:

Price: £90.00 plus p&p

Accessories


Fiona motor cruiser

Scale: 1 to 16
Hull: 38.5 inch 978mm
Beam:
Draft:

FIONA motor cruiser (set of 3)

Price: £96.00 plus p&p

Accessories


Fishermen Figures

Scale: 1:12
Hull:
Beam:
Draft:

These are the updated fishermen figures from DK Figures. They are made of cast resin and are supplied unpainted.

Price: £10.00 each plus p&p

Accessories


Flower Class Corvette hull

Scale:
Hull: 34.5 inch
Beam: 5.5 inch
Draft:

FLOWER CLASS CORVETTE HULL.

Same size, scale and detail as the "Matchbox" Flower corvette kit hull. Perfect replacement for a damaged hull or build your kit onto her, a nice size for a small scratch built corvette.

Measurements

  • Length....34.1/2".
  • Beam....5.1/2".

Price: £65.00 plus p&p

Accessories


Flying Drake Tug

Scale: 32nd scale
Hull: 37 inch
Beam: 10.5 inch
Draft:

FLYING DRAKE Tug

This diesel powered tug was built in 1956 and worked on the Clyde. Model is from MM1176 plan drawn up by Phil Thomas. Her sister ship the Flying Duck was a design featured in Model Boats in December 1973. This article included several photographs of the deck layout. Mouldings set comprises: Hull, deck, lower superstructure, bridge deck with funnel & bridge also flying bridge moulding.

Price: £180.00 plus p&p

Accessories


G5 class motor torpedo boat

Scale: 1 to 25
Hull: 37"
Beam: 7"
Draft:

G-5 class motor torpedo boat

hull ,cabin,and drawing

Price: £97.00 plus p&p

Accessories


HeatherBell TK272 Conquest

Scale: 1 TO 32
Hull: 29.5 inch 750mm
Beam: 9.5"
Draft:

HEATHER BELL LK272 CONQUEST

MODERN SHELTER DECK TYPE TRAWLER

HULL AND WHEELHOUSE MOULDING

Price: £92.00 plus p&p

Accessories


Holton 32

Scale: 1:12
Hull: 32"
Beam:
Draft:

Set of four, hull, Deck, Wheelhouse and Wheelhouse Roof

Price: £140.00 plus p&p

Accessories


Holton 32 Open Boat

Scale: 1:12
Hull: 32"
Beam:
Draft:

Set of three, Hull, Deck and Hatch.

Price: £110.00 plus p&p

Accessories


Holton 32 Rear Cabin

Scale: 1:12
Hull: 32"
Beam:
Draft:

Set of four, Hull, Deck, Wheelhouse and Wheelhouse Roof.

Price: £140.00 plus p&p

Accessories


Inchcape 45

Scale: 16th scale
Hull: 34 inch
Beam: 12 inch
Draft: 4.5 inch

INCHCAPE 45

Scale model of a 45ft. 1964 design GRP centre wheelhouse ketch rigged motor sailer. Hull lines are based on a trawler lines. Designed as a world traveler, with their powerful engines and modest sail plan they make for an attractive model, performance under sail is modest and a 5 inch external ballast keel (not supplied) needs to be fitted. Moulding set comprises: Hull, deck, one piece superstructure moulding, Wheelhouse roof, aft cabin roof & front cabin roof. Nice set of mouldings that need minimal fettling. Copy off original kit drawing showing all spars and sail plan. Model can be easily powered by a 545 type motor, four channel radio allows the use of sail winch for sail control, masts can fold down flat for transport of model.

Price: £178.00 plus p&p

Accessories


Interceptor 42

Scale: 1/12th
Hull: 42.5 inch
Beam:
Draft:

Interceptor 42 Pilot boat Hull with joined deck, wheelhouse, Selection of brass rod, Rubber, windows set, shafts and rudders, P brackets, Cast resin deck fittings, mast and clear cast resin navigation lights, life raft, rear wheelhouse canopy, rear door, rear lift supports and arms and decals

Price: Kit price £375.00 plus p&p

Accessories


Jeep, general purpose hull

Scale:
Hull: 28.5 inch
Beam: 9 inch
Draft:

JEEP" GENERAL PURPOSE HULL.

A build on anything hull, customs, police or coastguards launch, even a Broads Cabin cruiser, the choice is yours, let your mind run free.

Measurements

  • Length....28.1/2".
  • Beam....9".

Price: £34.50 plus p&p

Accessories


Jet Drive Rescue Boat

Scale: 1;16th
Hull:
Beam:
Draft:

Price: 169.00

Accessories


Jet Drive Rescue Boat 1:10 scale

Scale:
Hull:
Beam:
Draft:

JET DRIVE RESCUE BOAT 10th scale

set of 3

Price: £215.00 plus p&p

Accessories


Jet Drive Rescue Boat 1:16 scale

Scale: 1 to 16
Hull:
Beam:
Draft:

JET DRIVE RESCUE BOAT 16th scale

set of 7

Price: £147.00 plus p&p

Accessories


K.D.B. Waspada. P.O.2.

Scale: 32nd scale
Hull: 46 inch
Beam: 9 inch
Draft:

 

K.D.B. WASPADA. P.O.2.

Fast Missile Boat for Royal Brunei Malay Regiment.

The WASPADA class of fast missile boats were built by Vosper Thornycroft, Singapore, for the seaward defence of the British protectorate state of Brunei. Built on Vospers standard 37metre hull, these 150ton craft are powered by twin MTU. diesels of 9,000shp to give a top speed of 32 knots. There are three vessels in the class WASPADA commissioned July 1978, Pejuang PO3 & Seteria PO4 both commissioned 1979. These craft are fairly heavily armed with twin Exocet missile launchers and 30mm GCM30 Oerlikon guns, they carry a crew of 24, and are capable sea boats.

Our excellent hull features bow chine line and full waterline moulded in, the two sheet full-size plan by MARBETH DESIGNS allow for a highly accurate and detailled model to be made, fitted with R/C and twin 545 motors good on the water performance can be achieved making her ideal for regatta work.

Price: £80.50 plus p&p

Accessories


Kort nozzle 40 mm steerable kit

Scale: 40 mm steerable Kort nozzle
Hull:
Beam:
Draft:

This kit comprises of Kort nozzle fitted with 5 mm stainless steel shaft, Tiller arm & hex key, Brass tube and internal rudder support.

Price: £10.00 plus p&p

Accessories


Kort nozzle 50 mm steerable

Scale: 50mm steerable Kort nozzle
Hull:
Beam:
Draft:

This kit comprises of Kort nozzle fitted with 5 mm stainless steel shaft, Tiller arm & hex key, Brass tube and internal rudder support.

Price: £11.50 plus p&p

Accessories


Kort Nozzle 60mm steerable

Scale:
Hull:
Beam:
Draft:

Price: £15.00 plus p&p

Accessories


Lady Daphne

Scale: 1 to 24
Hull: 45inch
Beam: 11 1/4 inch
Draft:

Scale / Semi Scale - Lady Daphne

Lady Daphne High quality GRP hull    
Two sheets of plans by Harold A  Underhill A  M  I  E  S
sailing barge

Price: £120.00 plus p&p

Accessories


Lady Madelaine / Kingston Diamond

Scale: 1 to 32
Hull: 72.27 inch 1833mm
Beam:
Draft:

LADY MADELAINE  / KINGSTON DIAMOND set of 3

Price: £178.00 plus p&p

Accessories


Large Trawler Cat

Scale: 1:12 scale
Hull: 32.5 inches
Beam: 16.5 inches
Draft:

A brand new model boat launched this year, the Trawler Cat. This Semi Kit is suitable for any work boat, fishing or diving boats. It consists of hull, deck, wheelhouse, wheelhouse roof, front deck, mast, motor mounts, keels, windows, rudders, door, prop shafts, motors, hatches and exhausts.

Price: £360.00 plus p&p

Accessories


Lochin 33 style police boat

Scale: 1 to 12
Hull: 33 inch
Beam:
Draft:

LOCHIN 33 STYLE  POLICE BOAT

set of 3 hull ,deck and top

Price: £126.00 plus p&p

Accessories


Lord Hawke/Howe St Romanus

Scale: 1 TO 48
Hull: 47 inch 1094mm
Beam:
Draft:

LORD  HAWKE/ HOWE ST ROMANUS

Please note there are no plans with this model.

Price: £86.00 plus p&p

Accessories


Low Loader truck trailer

Scale: 1:14
Hull: 37"
Beam:
Draft:

Purpose built Styrene low loader trailer This durable truck trailer has been constructed from 4mm styrene. It has 6 new 50mm Tamiya mini wheels. A Tamiya style king pin. Oxford blue with an anti-slip painted grey deck. It measures 37" long x 7.75" wide. 1:14 scale This product is also available in kit form.

Price: Now only available in kit form. see below.

Accessories


M.A. James

Scale: 1/32 nd
Hull: 36.5 inch
Beam: 8.5 inch
Draft: 4 inch MAST HIGHT ABOUT 30 inch

M.A. JAMES.

1900, 3 Masted Schooner

This beautiful model hull is of a typical turn of the century trading schooner, Built in Portmadoc, North Wales in 1900, the M.A. JAMES was completed as a three masted topsail schooner for work in the slate and general cargo trade. These Welsh built schooners were known as the Western Ocean yachts due to their graceful lines and good turn of speed. With a crew of 5 (sometimes the masters wife sailed too) these relatively small vessels would range far & wide, slate to Germany, salt to Newfounderland, cod from Newfounderland to the Mediterranean, sometimes at sea for up to 15weeks.

This really beautiful hull comes complete with the gunwhales, rubbing strips, bow and stern detail and mouldings, this hull is a must for the scale sailor looking for a practical and attractive model. Plans are drawn fullsize and supplied by DAVID MacGREGOR, this model is eminently suitable for R/C, the hull could also be rigged as a Brig, Ketch or auxiliary Ketch.

Price: £92.00 plus p&p

Accessories


M.F.V. Holton 32

Scale: 1 to 12
Hull: 32inch 812mm
Beam:
Draft:

HOLTON 32 FISHING BOAT

SET OF 4

Price: £140.00 plus p&p

Accessories


M.F.V. Holton 32 open boat

Scale:
Hull: 32 inch 812mm
Beam:
Draft:

M F V HOLTON 32 OPEN BOAT

set of 3

Price: £110.00 plus p&p

Accessories


M.F.V. Holton 32 rear cabin

Scale: 1 to 12
Hull: 32 inch 812 mm
Beam:
Draft:

M F V HOLTON 32 REAR CABIN

srt of 4

Price: £140.00 plus p&p

Accessories


M.T. Edwina

Scale: 50th scale
Hull: 36 inch
Beam: 6.75 inch
Draft:

Motor Trawler EDWINA

Model Scale = 1:50.

Length = 36". Beam = 6.3/4". Displacement = 13lbs.

 

 

 

 

This hull  is for the late 50s early 60s side winder EDWINA typical of the last types of middle distance side trawlers built for use around the Faroes and Shetland islands.

Although our Hull for the EDWINA it can just as well be used for either of her sister ships the LUCIDA or JOSINA. With their Buff hulls, red oxide superstructures, white bow, stern and bridge, and red funnel, they make up into a colourful and handy sized model ideal for regatta work using a 545 type motor and simple two channel radio.

 

 

 

HULL.

Our beautifully moulded white one piece GRP hull is moulded to top of bulwark level, it has the side rubbing strips and trawl board protection strips all moulded on, very little work is required to get the hull ready for work.

 

DRAWINGS.

This is a newly drawn single sheet plan (drawn by David Metcalf) showing the elevations and deck plans, all are drawn out full size to suit the hull, NO construction detail is shown as such, however this plan used in conjunction with our CONSTRUCTION MANUAL will allow for a nicely detailed model to be constructed by even the beginner to our hobby.

CONSTRUCTION MANUAL.

 CONSTRUCTION MANUAL, this informative illustrated guide gives step-by-step instructions on how to fit out a typical GRP hull and is full of a wealth of useful hints and tips, as well as a list of other suppliers and manufacturers

Price: £108.00 plus p&p

Accessories


M.T. Gleaner

Scale: 32nd scale
Hull: 53.5 inch
Beam: 12 inch
Draft:

Motor Trawler GLEANER.

Our model hull is off a typical large far water side-winder trawler of modern streamlined appearance the mid to late 1950s. Based on the THORINA from Hull, that worked off the coast of Iceland before the cold wars. She could easily just as well be completed as one of many fine trawlers of that period. Our hull is accurately moulded up to the main deck level and is a plain moulding supplied white GRP. Drawings are by A.D.Trollope and come from the Nexus plans service.  This hull makes up into and handsome vessel capable of taking on the heaviest of weather conditions, building the model at this scale means there are many fittings and other parts readily available.

Price: £108.00 plus p&p

Accessories


M.T. Norina

Scale: 50th scale
Hull: 31.5 inch
Beam: 7.5 inch
Draft:

Stern Trawler "NORINA".

Model Scale = 1:50.The 130ft. long NODINA and her sister ship the IDENA were built in 1975 on Humberside as middle distance stern trawlers, they were designed to also have the ability to work together at pair fishing.Typical of the design of trawlers of their day they feature a forward wheelhouse with all controls to the seven winches inside at the back of the wheelhouse. The NODINA makes an attractive and different model with its white superstructure, redoxide/green decks and orange hull.

 

Model Length : 31.1/2". (800mm.)

Model Beam : 7.1/2". (190mm.)

 

An interesting feature is the ramp at the stern, this is covered by the back gantry, this ramp is for hauling the nets up onto the main fish deck. The fish were then emptied in to the lower deck where they were filleted and transferred to the cold stores, she was a successful trawler finally being withdrawn from service in 1999 after her engine failed.

 

HULL & MATERIALS PACKAGE.

This is another new type of package for the modeller and features the following:

Well moulded and accurate GRP hull, finished in white.

Cast white metal rudder and bottom rudder skeg.

A materials pack of white matt/matt H.I.P.S. (high impact polystyrene sheet) in 1.5mm, 1mm & 0.75mm, all sheets are a nominal size of 660mm x 274mm. All this material is easily glued with ordinary styrene adhesive.

6mm x 3mm x 660mm strip styrene for fixing the deck to the GRP hull and for corner reinforcement.

Large single sheet General arrangement drawing by David Metcalf, drawn full-size, this also shows details of the main winches and colour scheme, this drawing has been prepared from the original builders drawings.

Our own unique Construction Booklet (this is full of useful hints and tips and illustrations on how to put together and finish one of our GRP Hull packages) this helps make the construction of the model fairly straightforward.

The above package allows for a nicely detailed model to be made, at 1:50 scale many commercial fittings are readily available, fitted with a single 545 motor her performance on the water is excellent, making her ideal for regatta work or just cruising the lake. Although more suited to a modeller with some previous experience she can be tackled by a beginner.

Price: £102.00 plus p&p

Accessories


M.T. Radiance

Scale: 24th scale
Hull: 30 inch
Beam: 10.25 inch
Draft:

Single Screw Multi-Role Fishing Vessel.

Following a study that indicated that fishing boats need to be more adaptable, Norwegian yard A.S.Vaagenverft saw the need to produce a design that incorporated all these features, the result was the RADIANCE and her sister ship Cameo, delivered in 1981 the pair were primarily intended for pair trawling off the west coast of Scotland.

Our hull features port hole, stem anchor hawse pipe, full waterline, panama ports, wash ports and rubbing strip locations all moulded in, with a wide beam and fitted with R/C. and single 545 motor the model will be both stable and capable of heavy weather use. An interesting and colourful model can be made using the highly detailled plans supplied by JIM POTTINGER to his usual high standard. Her large scale means a beginner need not be frightened off having a go at her.

Price: £78.50 plus p&p

Accessories


M.V. Pateke

Scale: 48th scale
Hull: 50 inch
Beam: 7 inch
Draft:

1950s Motor Cargo Vessel.

The motor vessel PATEKE was built by Scheepswerf Hoogezand N.V. of Holland in the 1950s for Richardson & Co Ltd of Napier, New Zealand. A typical dutch design of the period, PATEKA has a deadweight of 1,150tons. Her six cylinder 1,120bhp.Polar engine gave her a speed of 12knots and she was capable of carrying 80,000cu.ft. of grain. Cargo handling gear consists of nine derricks all operated by electric winches. PATEKA is altogether a trim and atractive little vessel representative of her period.

Our hull is well moulded and features the side rubbing strakes, port holes, panama ports, anchor hawse pipes, wash ports and waterline all moulded in, this detailled hull has plenty of room for electric or steam power plant all with R/C. control. Access into the hull is excellent via the forward hatches and large removable rear superstructure. The full-size plans by Nexus are excellent and allow for a nicely detailled model to be built, being such a pretty boat she makes for an excellent model that looks really good on the water and is quite capable of taking heavy weather, construction is straight forward and ideal for either the first time modeller or experienced builder.

Price: £79.00 plus p&p

Accessories


M.V.Crear

Scale: 1 to 40
Hull: 34inch
Beam: 8.5inch
Draft:

M.V CREAR WELL POND VESSEL

Price: £145.00 plus p&p

Accessories


Motor Mounts

Scale:
Hull:
Beam:
Draft:

Cast resin motor mounts. small 6cm x 4.75cm medium 5.50cm x 5.50cm large 8cm x 5.75cm Please note that the mounts are supplied without holes. Photo for display purposes only.

Price: £2.50, £4.50 & £6.50 plus p&p

Accessories


Net Drum

Scale: 1:12 & 1:16 scale
Hull:
Beam:
Draft:

CNC cut styrene Net Drum Kit.

Price: £15.00 plu p&p

Accessories


North Sea 38

Scale: 24th scale
Hull: 38 inch
Beam: 11 inch
Draft:

NORTH SEA 38

Based on a typical steel or wooden cruiser stern single screw inshore/middle water fishing boat found in most ports around the coast in the 1970s & 80s. With its aft raised superstructure and small bow shelter deck it does make for an attractive model. Moulding set comprises: Hull, deck, stern cabin/wheelhouse, wheelhouse roof, small bow shelterdeck & fish hold hatch. Mouldings need plenty of fettling. Ideal for power with a reduction drive 545 of Bueller type motor & two channel R/C.

Price: £160.00 plus p&p

Accessories


Pilot boat

Scale:
Hull: 34"
Beam: 10.25"
Draft:

Pilot Boat (set of three) Based on the Nelson Pilot Boat. Hull, Deck and Wheelhouse.

Price: £115.00 plus p&p

Accessories


Portia North Atlantic Side Trawler

Scale: 1 to 55
Hull: 48inch 1219mm
Beam:
Draft:

PORTIA  NORTH ATLANTIC DIESEL SIDE TRAWLER

Price: £92.00 plus p&p

Accessories


Power boat hull

Scale:
Hull: 22.5 inch
Beam: 6.25 inch
Draft:

POWER BOAT H ULL

A modern design of hull suitable for a small, scale day boat or racing boat.

Measurements

  • Length...22.1/2".
  • Beam....6.1/4".

Price: £26.00 plus p&p

Accessories


Prop Shafts

Scale:
Hull:
Beam:
Draft:

A selection of propellor shafts, crafted in our workshops. All have Steel inners, Brass outers, bearings, nuts and washers. We can make any shaft to order but below are prices for our standard shafts. 12" shaft £8.35 11" shaft £7.80 10" shaft £7.35 9" shaft £6.80 8" shaft £6.35 7" shaft £6.05 6" shaft £5.80

Price: Plus p&p

Accessories


R.N.L.I. Atlantic Rib

Scale:
Hull: 24.5 inch O/A 31 inch
Beam: 10 inch
Draft:

HULL,DECK,DECK HATCH  AND RIBS

This model is currently out of production due to problems with the existing mould. We are in the process of rectifying this, please bear with us. Apologies for any inconvenience caused. You can still purchase this old style if you wish, but it will need a little filling and sanding of the sponsons. The hull and deck remain ok. Because of this slight defect we have reduced the price by £10.00 until the new mould has been produced.

Price: £96.00 plus P&P

Accessories

Rib Top (centre console) kit £20.00

R.N.L.I. Barnett Class Lifeboat

Scale:
Hull: 39 inches 990mm
Beam: 10.5 inches
Draft:

R.N.L.I BARNETT CLASS LIFEBOAT

Price: £85.00 plus p&p

Accessories


R.N.L.I. Oakley Class Lifeboat

Scale:
Hull: 35.5 inches
Beam:
Draft:

R.N.L.I OAKLEY CLASS LIFEBOAT

set of 3

Price: £85.00 plus p&p

Accessories


R.N.L.I. Arun 52 Class Lifeboat

Scale: 12th
Hull: 52 inch
Beam: 15 inch
Draft:

R.N.L.I. 52ft. ARUN LIFEBOAT. Arun Class Lifeboat. The "ARUN" class lifeboat is a fast afloat boat and when introduced was the largest and most capable in this country. This model is of the 52ft. version with the earlier glassfibre superstructure. The model comes as HULL & DECK JOINED TOGETHER the hull has the spray rails moulded in and the deck has all the raised positioning plates for winches, fairleads and stanchions. There is also available a one piece MOULDED SUPERSTRUCTURE, this forms the access hatch, all windows, grills and deck lights are moulded in. Note!. The cabin is for the earlier glassfibre version with rounded corners. The sketch plan shows detail which needs to be added to complete the model. Ideal for R/C. and large electric power the model, as with all large models, looks magnificent on the water, again being extensively pre-fabricated construction can be quick and the first time builder need not be too worried about completing her. NOTE! WE ALSO DO THE 54ft.ARUN HULL AT 1:12 SCALE.

Price: £210 00 plus p&p

Accessories


R.N.L.I. Arun 52 Class Lifeboat 1:16 scale

Scale: 1 to 16
Hull: 39 inch
Beam:
Draft:

R.N.L.I. ARUN 52 CLASS Lifeboat 16 scale

hull only

Price: £80.50 plus p&p

Accessories


R.N.L.I. Arun 52-01

Scale: 1.TO 12
Hull:
Beam:
Draft:

R.N.L.I ARUN 52-01

HULL ONLY

Price: £103.00 PLUS P&P

Accessories


R.N.L.I. Arun 54 BP Fortis

Scale: 1 10 20
Hull: 32inch 812mm
Beam:
Draft:

R.N.L.I ARUN 54 BP FORTIS

Price: £175.00 plus p&p

Accessories

Parts Fitting Kit (Spun white metal) £115.00

R.N.L.I. Arun 54 Class Lifeboat

Scale: 1 to 12
Hull: 54 inch
Beam:
Draft:

R.N.L.I. ARUN 54 CLASS Lifeboat

hull and deck only

Price: £112.00 plus p&p

Accessories


R.N.L.I. Brede 38-01

Scale: 1.to 12
Hull:
Beam:
Draft:

R.N.L.I BREDE 38-01

SET OF 4

Price: £125.00 plus p&p

Accessories


R.N.L.I. Brede Lifeboat

Scale: 12th scale
Hull: 33 inch
Beam: 11 inch
Draft:

This is a 12th scale model of the Brede lifeboat. Hull, deck and superstructure.


The hull and deck are joined in the mould with a loose fitting superstructure, all are white coloured GRP. 

 

Price: £126.00 plus p&p

Accessories


R.N.L.I. Mersey Class lifeboat

Scale: 12th
Hull: 38 inch
Beam: 12.5 inch
Draft:

 

 

 

Mersey Class Carriage Launched Lifeboat.

The Mersey class lifeboat is a fast carriage launched boat designed to meet modern demands, the design being fully self righting by the buoyancy of the superstructure. The model has the triangular spray rail, bilge rails, exhaust ports and hydraulic ram (for trim tabs) recesses all moulded in. This will significantly reduce the time in producing a first class and realistic looking model of a handy size and with twin motor controls a versatile and manouverable model.

The model does not have a plan with it (these can be obtained from the RNLI at Poole) but does have an optional CABIN MOULDING which has all the window positions moulded in, the hull and cabin mouldings make for a very stable, seaworthy abd realistic model on the water. There is plenty of room in the hull for R/C. batteries and other working features such as lights, horn, engine sound etc. This is a model ideal for beginner or expert alike to try their hand at.

Sorry fittings kit no longer available.

Price: £145.00 plus p&p

Accessories


R.N.L.I. Shannon Lifeboat

Scale: 1/12th
Hull:
Beam:
Draft:

The Shannon Lifeboat semi-kit is now available to purchase. The semi-kit will consist of GRP hull, deck, superstructure and soft cast resin fender which has been designed and produced especially for this model. 28mm water jets can be easily ordered from www.kehner-modellbau.de (KMB) Please note that this model is sold as a semi-kit, with accessories when they become available, and not as separate components. Running time on this model is currently 8 weeks due to the high demand. Hot off the production line are the new Shannon Window sets and the newly adapted deck and wheelhouse with added hatches. Revised price £290.00 which includes, Hull, Deck, Wheelhouse, Fender, Window surrounds with glazing, bilge keels, rear deck hatches and steering bulkhead. Available to order now. More to follow........

Price: £298.00 plus p&p

Accessories


R.N.L.I. Solent Class Lifeboat

Scale: 1/12
Hull: 48 inch
Beam: 15inch
Draft:

HULL

 

CABIN

Price: £140.00 plus p&p

Accessories


R.N.L.I. Tyne Class Lifeboat

Scale: 12th
Hull: 47inch
Beam: 15inch
Draft:

The "TYNE" lifeboat is a fast slipway launched boat specifically designed to be housed in existing lifeboat houses and to meet modern demands,

 

HULL, DECK AND  2 X CABBINS

Price: £190.00 plus p&p

Accessories


R.N.L.I. Watson Class Lifeboat

Scale: 12th
Hull: 47inch
Beam: 13inch
Draft:

The 47ft WATSON class lifeboat was  slipway launched designfrom a board of designer G.L waston, larger than earlier designsit was a boat that saw service for many years 

Price: £170.00 plus p&p

Accessories


R.N.L.I. Waveney

Scale: 1;15
Hull: 36 inch
Beam: 9 inch
Draft:

Hull

 

R.N.L.I. THE SCOUT No. 44-018.

44ft. Waveney Class Lifeboat.

Originally developed from a U.S. Coast Guard design the Waveney Class was the first fast afloat lifeboat with a maximum speed of 15knots. Her hull of steel with aluminium superstructure shape gave her a self-righting capability.

The full size drawings is of the Hartlepool lifeboat The Scout No.44-018. The hull is moulded with the full keel, accurate for the whole class any one of the 23 boats built to this design can be made, also of course you may wish to build her as one of the 63 U.S. Coast Guard Cutter versions.

At the largish scale, this is not a difficuly model to make, easily tackled by the beginner, powered by 545 type motors and R/C. with her colourful paintwork she looks a pretty and atractive model on the water, her high forecastle also allows her to take heavy water in her stride

.

Measurements

  • Model Scale = 1:15.
  • Length....36".
  • Beam....9".

Price: £80.50plus p&p

Accessories


R.N.X.S. Loyal Moderator.

Scale: 48th scale
Hull: 20 inch
Beam: 5 inch
Draft:

Sorry, no longer available, This model is now owned by Adam Slater of Mountfleet Models.

Price:

Accessories


RAF Crash Tender Crew Figures

Scale: 1:12
Hull:
Beam:
Draft:

DK Figures RAF. Crash Tender Crew cast resin figures. these were a commission for a member of the Wickstead Park Model Boat Club and have proved very popular. They come complete with removable hats. Please note they are supplied unpainted.

Price: £10.00 each plus p&p

Accessories


Renegade MK 3

Scale: 24inch
Hull:
Beam:
Draft:

Model Boat  Renagade MK3

This boat is the ultimate development of the very successful

Mk1 Renegade As an electric powered boat with 12 plus cells a fantastic performance can be obtained using surface driveThis boat can also be use with small IC engines 12 and is suitable for the OMRA Z class  It has also been run with under water drive with some successThe boat is 610mm 24inch long and is made   of fibreglass it comes joined with a    hatch                                                       RENEGADE MK 3 610mm 24inch F E & Z CLASS 14 CELLS   £55.00


UK National s Winner 2004

Mono 2 Restricted first placeMono 2 open  first place  Mono 3 open  first & second place

October 2004 speed weekend
New UK speed record 20 cell class
48.9mph on 14 cells

Price: £55.00 plus p&p

Accessories


River Queen

Scale:
Hull: 34.5 inch
Beam: 10.5 inch
Draft:

Simulated Clinker Open Launch

Price: £65.00 plus p&p

Accessories


RNLI Crew Figures

Scale: 1:12
Hull:
Beam:
Draft:

This is a set of RNLI 1:12 scale Lifeboat Crew cast resin figures, suitable for the older style boats e.g. Brede, Mersey and Arun. they are part of a collection from D K Figures. Please note that they are supplied unpainted. All figures old and new can be viewed on the DK Figures website www.dkfigures.co.uk

Price: £10.00 each plus p&p

Accessories


RNLI RIB Figures

Scale: 1:12 scale
Hull:
Beam:
Draft:

Introducing the updated collection of RNLI RIB Crew from D K Figures. Please note that they are supplied unpainted. All figures old and new can be viewed on the DK Figures website www.dkfigures.co.uk

Price: £10.00 each plus p&p

Accessories


Rubber Fendering

Scale:
Hull:
Beam:
Draft:

Variety of Rubber half round and D section. 6mm Half round cord £2.00 8mm Half round cord £2.50 12mm Half round cord £3.50 16mm Half round cord £4.00 8mm D section £5.00 self adhesive 10mm D section £5.00 self adhesive 12mm D section £5.50 self adhesive 12mm D section £5.30 U shaped Rubber £2.50

Price: Per metre listed above

Accessories


S.S. Kyle Rhea

Scale: 32nd scale
Hull: 51inch
Beam: 8.5 inch
Draft:

 

Single Hatch Steam Coaster. Formally TODD HEAD.

The KYLE RHEA was built as the TODD HEAD and carried coal around the coast of the United Kingdom, she is typical of the small coastal steamers of the earlier part of this century.

Our beautifully moulded hull comecomplete with port holes, hawse pipe holes, wash ports, panama ports and full side rubbing strakes moulded in, this superb hull is ideal for the installation of a steam plant, especially as the whole rear superstructure can be made removable, as the model also features a large forward hatch this can also be made removable. The inside height at the back is 6.1/2 inch to 7.1/2 inch. Electric power can also be used and R/C is a must.

The plans are supplied full size to suit the model, the largeish scale makes for easy and rapid construction, this is a model that looks superb on the water and can be made by a beginner as a first time model.

Price: £104.00 plus p&p

Accessories


S.T. Alison

Scale: 24th scale
Hull: 67inch
Beam: 15 inch
Draft:

Typical Steel/Wooden Herring Steam Drifter.

ALISON is a typical steel/wooden steam drifter of the early 1900s, many hundreds of these vessels operated out of the East Coast ports of Grt.Yarmouth and Grimsby during the first half of the century, drift trawling for Herring & Mackerel, many were taken up during both world wars for use as mine sweepers into the Royal Navy.

Our massively moulded hull includes moulded in rubbing strakes and panama ports, the full size drawings show detail of a typical trawler and form a good basis for a named vessel, as detail is large it is relatively easy to build and many commercial fittings are available to simplify and speed construction.

This is the one of the largest hull we make and her sheer size, with a lift-off superstructure, make her suitable for the installation of large steam engines and boilers, she will however easily take R/C gear and fitted with a large electric motor with a car battery for power will give a tremendous running time, she would in fact be perfect for a 24hr endurance event. As with all large models, when complete she looks absolutely magnificent on the water, she will of course take virtually any weather conditions in her stride. If you are thinking of a big model, look no further!

Price: £178.00 plus p&p

Accessories



Sangsetia PX11

Scale: 24th scale
Hull: 44 inch
Beam: 9 inch
Draft:

 This is another new type of package for the modeller and the Pack features the following:-

A really well moulded and accurate GRP hull, finished in white.

A materials pack of white matt/matt H.I.P.S. (high impact polystyrene sheet) in 2mm, 1.5mm, 1mm & 0.75mm, all sheet nominal size of 660 x 274. plus a half sheet of 1mm clear (with protective film each side) all this material being quickly and easily glued with ordinary styrene adhesive.

6mm x 3mm x 660mm. strip styrene for fixing the decking to the GRP hull and for corner re-inforcement.

The drawings pack consist of a full-size large single sheet re-mastered general arrangement plan this shows the position of the deck beams and other details.

A new large drawing with full-size drawings of all deck beams, deck pieces, superstructure, vents, flying bridge and locker parts, these shapes can all be transferred straight to the styrene sheet, parts can then be cut out and glued together, this highly accurate drawing will greatly help construction.

A large exploded three dimensional construction drawing of the wheelhouse/flybridge showing how all named parts go together.

A newly written and individual Sangsetia construction manual saying how to put the parts together. We also include a copy of our own unique Construction Booklet on  making and  constructing  the model fairly simply, straightforward and quick, a perfect subject For beginner or expert alike.

All drawings and booklets have been prepared by Andy Griggs and Are clear, straightforward and simple to follow, they will make Construction quicker and simpler than normal.

The above package allows for a really detailed model to be made relatively quickly, at 1:24 scale many commercial fittings are readily available, fitted with twin 545 or 540 motors her performance on the water is excellent, making her ideal for regatta work or just cruising the lake. She is not a difficult model to make and well worth the effort.

 

The 18No. vessels of the PX class were built for the Royal Malaysian Police by Vosper Shipyards of Singapore between 1963 & 1970, they were built to undertake general policing duties within territorial waters. Powered by twin 2,700hp. Mercedes-Benze diesels these elegant craft had a cruising speed of 15knots and a top speed of 29knots, their crew consisted of 15 officers and men, twin 20mm. OTOMelara cannons being their armament.

They were primarily designed to operate from local ports and not from one large base, crews are recruited locally and equipment designed to be maintained by crew mechanic, fuel could be taken from quay-side tankers or lighter, provisions and stores from local chandlers suppliers, in essence a fairly simple technology vessel manned by crews with local knowledge.

Our Hull Package includes all names and prefixes so that any one of the 18No. boats may be built by the modeller.

Price: £130.00 plus P&P

Accessories


Schooner hull

Scale:
Hull:
Beam:
Draft:

SCHOONER HULL

Price: £96.00 plus p&p

Accessories


Scottish Fishing Boat

Scale:
Hull: 20 inches
Beam: 7.25 inches
Draft: 2.5 inches

Small Scottish style fishing boat. More info to come when available.

Price: £30.00 plus p&p

Accessories


Sea Trojan

Scale: 24th scale
Hull: 44 inch
Beam: 12 inch
Draft:

SEA TROJAN.

Single Screw Harbour Tug

MOULDING SET:- HULL, MAIN SUPERSTRUCTURE, WHEELHOUSE, FUNNEL.

The SEA TROJAN is one of a pair of tugs owned and operated by the Aberdeen Harbour Board. Her sister ship Sea Griffon and herself were built by John Lewis & Sons of Aberdeen in 1962. They are what can be considered to be classic looking tugs, with their large steerable Kortz nozzle they are extremely manoeuvrable and powerful for their size, with a bollard pull of 14tons and a cruising speed of 11.5knots.

Whilst they are a comparatively small tug at 88ft. the model is big and beefy at a scale of 1/2 inch to 1ft. (1:24) the hull is strongly moulded with bulwarks and anchor recesses moulded in.

Our super mouldings set comes complete with a full-size two sheet plan set by IAN L RAE. These plans are extremely accurate and superbly detailed with every fitting drawn and detailed. You will be hard pressed to find better.

Using the mouldings set a large and good looking model can be built fairly quickly, with the availability of fittings to 1:24 scale this is a model that can be tackled even by the beginner. I have seen one made up running on the water, as with all largish models it looked really super, ideal for regatta work and tug-towing events.

Price: £126.00 plus p&p

Accessories


Shows

Scale:
Hull:
Beam:
Draft:

Shows attending

Price:

Accessories


Single Styrene sheets

Scale:
Hull:
Beam:
Draft:

Styrene sheets 274mm x 660mm (10.75” x 26”) White 0.5mm £0.85 White 0.75mm £1.25 White 1.0mm £1.65 White 1.5mm £2.50 White 2.0mm £3.30 White 3.0mm £4.95 White 4.0mm £5.45 White 3.0mm strips (6mm x 274mm) £0.10 Clear 1.0mm £3.00 Styrene sheets 1372mm x 660mm (54” x 26”) White 0.5mm £2.65 White 0.75mm £4.00 White 1.0mm £5.55 White 1.5mm £7.95 White 2.0mm £10.60 White 3.0mm £15.90 White 4.0mm £21.25

Price: From 85p to £21.25

Accessories


Slipper launch

Scale:
Hull:
Beam:
Draft:

slipper launch large

Price: £65.00 plus P&P

Accessories


Soft Cast Resin Ball Fenders

Scale:
Hull:
Beam:
Draft:

Rubber Fenders Soft, Rubbery Cast Resin Fenders with Cast Resin Caps. Approximately 32mm in diameter. Available in several colours (white, pink, orange and yellow with black caps)

Price: £3.50 each plus p&p

Accessories


Soft Cast Resin Fenders

Scale:
Hull:
Beam:
Draft:

Soft Cast Resin Tube Fenders Soft, Rubbery, Cast Resin Tube shaped Fenders. Available in white with black caps

Price: £4.00 each plus p&p

Accessories


Spider Yacht

Scale:
Hull: 37 inch
Beam: 12 inch
Draft:

SPIDER.

A classic style of gaff yacht hull for the real traditionalists amongst you, would make nice scale model to join Scale Sail Association with.

Measurements

  • Length....37".
  • Beam...12".
  • Hull Depth....12".(approx)

Price: £69.00 plus P&P

Accessories


Sports fishing boat

Scale:
Hull: 22.5 inch
Beam: 8 inch
Draft: 1.5 inch

Sports fishing boat

light, fast sports fishing boat it comes with 4 fibreglass moulding the hull and deck are joined together in the mould. The hull and deck and superstructre are available in white only. She works really well on a 540 motor on 7.2 volt batteries.

Price: £69.00 + p&p

Accessories


Springer tug

Scale:
Hull: 18"
Beam: 8"
Draft:

Springer Tug Semi Kit. Consists of Hull, Wheelhouse kit, Deck kit, Pushers. All items can be purchased separately.

Price: £50.00 plus p&p

Accessories

Wheelhouse Kit £10.00
Deck Kit £10.00
Pushers £10.00
Hull £20.00
Deck Bollards pack of 6 £3.50
40mm Kort nozzle £12.00

Steam Cutter Solent

Scale: 8th scale
Hull: 42.5 inch
Beam: 10.75 inch
Draft:

 

This hull and plans pack is for the Victorian style open steam launch SOLENT she can be made as either an open cutter or with the removable canopy fitted her large scale makes for a model with a reasonable displacement to take either a Vertical or Horizontal steam plant with her high freeboard she is a good rough water model for those windy days down at the lake. Our reduction off the plan shows this to be a fairly straight forward and functional model to build and has been primarily designed for simple construction with an exposed steam plant This model was originally in the range manufactured by Ivor Broughton of Boats and Models this range is now owned by MODELS BY DESIGN.

Our beautifully moulded white one piece GRP hull is moulded to top of bulwark level very little work is required to get the hull ready for work. The one piece white GRP deck moulding is designed to fit over the top of the hull side sheer line and has a slight return moulding around the hatch opening for strength purposes, jointed together the two make one very strong finished unit.

This is a newly drawn, full-size single sheet plans showing the elevations of the model and some construction detail, this plan used in conjunction with our CONSTRUCTION MANUAL will allow for a very nice jaunty looking model to be constructed by even the very beginner to our hobby.

Included is our unique CONSTRUCTION MANUAL, this informative illustrated guide gives step-by-step instructions on how to fit out a typical GRP hull and is full of a wealth of useful hints and tips, as well as a list of other suppliers and manufacturers.

Price: £140.00 PLUS P&P

Accessories


Steam Launch Hull

Scale:
Hull:
Beam:
Draft:

STEAM LAUNCH HULL

Price: £69.00 plus p&p

Accessories


Steam Tug Cervia

Scale: 1:24
Hull: 55"
Beam: 12.5"
Draft:

Empire Raymond, as the Cervia was originally named, was part of the revised building programme ordered for Operation Overlord, the invasion of Europe on D-Day. In the event she was not completed until after the end of the Second World War. The tug was finished with many of the design feature intended for the invasion. She had an armoured wheelhouse and gun emplacements installed. She weighed over 350 tons and was powered by a 1,000 horsepower (750 kW) triple-expansion steam engine. Her boiler had been installed with oil burners but the design allowed for rapidly reverted to coal firing. All the ships that were ordered by the British government during the War period were given the prefix Empire which was the equivalent of the "Liberty Ship" building programme in the United States of America. The Cervia is thought to be last Empire Ship surviving in the United Kingdom. Fibreglass hull only.

Price: £92.00 plus p&p

Accessories


Storm

Scale:
Hull: 21 inch
Beam:
Draft:

Model Boat  Storm

The Storm is ideal for use with brushless Motors   as tested by Pete Lockhart  but will give a very good performance using a standard or modified 540 Motor using 7 cells with surface drive The storm came second in the UK nationals in 2002 Surface drive only This boat is made of fibreglass and comes joined  It is 530mm  21inch  long

STORM 530mm  21inch FAST ELECTRIC 6    7 CELLS £50.00

Price: £50.00

Accessories


Styrene Sheets

Scale:
Hull:
Beam:
Draft:

Styrene Sheets Large 1372mm x 660mm (54" x 26") Available in 0.50mm, 0.75mm, 1.00mm, 1.50mm, 2.00mm, 3.00mm and 4.00mm Small sheets 274mm x 660mm (10.75" x 26") Available in the same sizes as above.

Price: From £1.10-£42.50

Accessories


Sunbeam LK335

Scale: 1 TO 32
Hull: 32.5 820.mm
Beam:
Draft:

SUNBEAM LK335

Price: £80.50 plus p&p

Accessories


Suva MK2

Scale:
Hull: 18.5 inch
Beam:
Draft:

Model Boat  Suva MK2

The Mk 2 Suva is an extended and stepped version of the Mk1  It will run with 6 7 cells and 540 motors you may also use small brushless motors  Surface drive only Made of fibreglass and it is 485mm    long SUVA MK 2 470mm  18.5inch    FAST ELECTRIC 6    7 CELLS  £39.50

Price: £39.50 plus p&p

Accessories


Teak Boat Signs

Scale:
Hull:
Beam:
Draft:

CNC cut Teak signs. Made to order. Any size, any name, just let us know what you would like and we will do our best. Size shown 11cm x 2cm (For a limited period, size shown issued free to every Celia Jane purchase until end of March 2011)

Price: From £4.50 per pair

Accessories


Trawl Winch Kit 1:12 scale

Scale:
Hull:
Beam:
Draft:

Selection of CNC cut styrene sheet, stainless steel and cast resin.

Price: £15.00

Accessories


Trawler Cat small

Scale:
Hull: 30 inch
Beam: 15 inch
Draft:

Scale / Semi Scale

This hull is based on a full sized boat in Eastbourne Marina  it is a very stable hull and will carry a lot of weight.

This hull will work with twin water jets or can be prop driven this hull has also been used as a recovery and bait boat.

The boat is made of fibreglass and is hull only, it is 765mm (30inch) long and has a 380mm beam  15inch  TRAWLER CAT 760mm  30inch SCALE ELECTRIC £65.00

Price: £65.00 hull only semi kit £110.00

Accessories


Truck Trailer Kit

Scale: 1:14
Hull:
Beam:
Draft:

This is an extremely durable Low loader truck trailer kit made from CNC cut, 4 mm High impact styrene sheet. compatible with 1:14 scale Tamiya trucks. It measures 37" long and 7.75" wide.

Comes complete with swinging arms, axles, wheel rims, loading ramps, Tamiya style kingpin and fastenings. Requires 6 Tamiya mini tyres. THIS ITEM HAS BEEN TEMPORARILY SUSPENDED

Price: £115.00 plus p&p

Accessories


Tug Typhoon

Scale: 1:50
Hull: 38.5 inch
Beam: 11.5 inch
Draft:

TUG TYPHOON.

Twin Screw Salvage/Towing & Supply Tug.

The full size TYPHOON and her sister ship Tempest are large and very capable vessels, built by Damen in Holland for their owners Wijsmuller in 1976, these ships at the time took North Sea supply ship design to new limits, having a very high bow, piled up superstructure and a low stern desk, known all over the world, these ships have carried out many varied jobs including the tow-out of the Statfiord C oil rig platform for which their bows were specially modified (details on plan).

The extremely well detailed, full-size plans were specially drawn for use from the original ships plans, this model is ideal for for multi-function R/C and twin screw electric power, ideal for tug towing and especially regatta work the model looks very impressive on the water, this hull measures 10 inch  from keel to deck level so has plenty of internal volumn for fitting all those special functions such as horn, working bow thruster, engine sound, fire hydrants etc., a good model for expert of beginner alike.

.

Measurements

  • Model Scale = 1:50.
  • Length....38.1/2".
  • Beam....11.1/2".

Price: £95.00 Plus p&p

Accessories


Wildcat 53 Windfarm Support Catamaran

Scale: 1/12
Hull: 50 inch
Beam: 20inch
Draft:

Wildcat 53 windfarm support catamaran Twin deck. Kit comprises of Hull & ring deck, wheelhouse, canopy, main deck, lower foredeck with steps. 2 plastic hatches, silver grey window set and doors, both with glass. Selection of brass tube & bar for railings, mast, handrails and steps. Life raft and clear cast resin navigation lights. Cast resin deck fittings consist of 4 large doors 4 small doors 4 deck hatches 5 mushroom vents 1 radar 2 navigation light holders 1 mast transponder 4 satellit/GPS receivers 4 life rings 6 deck bollards 1 capstan Rubber fender and decals plastic mast light and radar brackets 70 3mm washers & 8 6mm washers There will be more fittings to follow shortly.

Price: £495.00 plus p&p

Accessories


Wildcat 53 Windfarm Support Catamaran 1:24

Scale: 1:24
Hull:
Beam:
Draft:

This is the smaller , more compact version of the Wildcat 53 Windfarm support catamaran. It is available in two versions, one twin screws and the other jet drive, taking the Graupner mini jets. This kit consists of Fibreglass hull, deck, ring deck, superstructure and rear canopy. CNC cut styrene rear deck hatches, window set, door and mast brackets. Rubber fendering, cast resin deck & mast fittings. Prop shafts, rudders and A frames. Brass rod, tube and washers for railings, ladders and mast. Set of decals and CD of photos of the full size Island Panther & Island Tiger vessels to add with the build. This kit does not include the jets, motors or props.

Price: £215.00 (shaft) & £205 (jet version) plus p&p

Accessories


Wimpey Seahorse

Scale: 1:65
Hull: 41.5inch
Beam: 9 inch
Draft:

WIMPEY SEAHORSE.

North Sea Oil Rig Supply Vessel/Tug.

The WIMPEY SEAHORSE and her sister ship the WIMPEY SEAHUNTER were both built by Appledore Shipyards, North Devon. both being complete during 1982. They are built as multi-role vessels, being classes as Fire Fighting, Tug, Anchor Handling and Supply

WIMPEY SEAHORSE was commissioned in February 1982, shortly afterwards she was requisitioned by the Royal Navy and taken up for the Falklands Island War, she was one of the vessels that took part in the liberation of South Georgia. She was returned to the UK in September 1982 and after a refit returned to North Sea Work.

Our detailed moulded hull complete with comprehensive drawings specially supplied for us by ANDY GRIGGS make for a highly detailled and colourful model, with twin screw power and R/C. she makes a good regatta boat, tug towing boat and heavy weather model, even the monitors can be made to work, a good one for beginner or expert alike to try

Price: £93.00 plus p&p

Accessories